第1个回答 2009-05-23
Lamborghini Reventon
The essence of the marque: just 20 examples of a design masterpiece
Clearly a Lamborghini, but nothing quite like it. A super car without equals: the Lamborghini Reventón is a road vehicle with an extreme specification and, at the same time, a limited edition masterpiece - a coherent style, angular with sharp lines, inspired by the very latest aeronautics.
With just 20 produced, each 1 Million Euro (without taxes) Lamborghini Reventón is a symbol of extreme exclusivity, yet still offering the extraordinary performance that makes the Reventón so unrivalled: under the completely autonomous design, the Reventón possesses the entire technical and dynamic competence of the twelve cylinder Lamborghini.
Lamborghini prides itself on being the extraordinary manufacturer of extreme super sports cars without compromise. Sensuality and provocation characterise every Lamborghini, with an aggressively innovative style. "However, the Reventón is the most extreme of all, a true automotive superlative. Our designers at the Lamborghini Style Centre took the technical base of the Murciélago LP640 and compressed and intensified its DNA, its genetic code," affirms Stephan Winkelmann, President and CEO of Automobili Lamborghini S.p.A.
Born in Sant'Agata Bolognese
The Lamborghini Reventón has been entirely designed in Sant'Agata Bolognese, the original birthplace of the Lamborghini and the native home of every super car born under the sign of the bull. The design drawn up in Lamborghini's Centro Stile (Style Centre) is fine-tuned in close collaboration with the Lamborghini Research and Development Department. Thus, the Reventón is not only "haute couture" but it also stands out for its elevated dynamism whilst being entirely suitable for every day use.
The Lamborghini Reventón is not destined to remain a one-off. A total of 20 Lamborghini friends and collectors will be able to own this extraordinary car and, naturally, enjoy the incomparable pleasure of driving it.
The name Reventón has been chosen according to Lamborghini tradition. Reventón was a fighting bull, owned by the Don Rodriguez family. It is included in the list of the most famous bulls ever and is known for killing the famed bullfighter Felix Guzman in 1943.
Inspired by the fastest airplanes
The present day Lamborghini models are distinguished by the clear language of their shape. The coherent proportions of the Murciélago and Gallardo highlight their power and dynamism. Sharp edges, precise lines and clean surfaces: these are ingredients of a style reduced to the essential. Each element is created exactly according to its function; ornaments and decorations are totally foreign to a Lamborghini.
With the Reventón the Centro Stile designers have coherently developed this philosophy, inspired by another sphere where speed and dynamism reign absolute: modern aeronautics, responsible for the fastest and most agile airplanes in the world. This has created an extremely precise, technically striking style with a new vitality: interrupted lines and contorted surfaces create a fascinating play of light, giving the car incredible movement.
Made of carbon fibre and precision
Although it is based on the extraordinarily successful Murciélago LP640, the exterior design of the Reventón is completely new. Just like the base model, the exterior is made of CFC, a composite carbon fibre material, which is as stable as it is light. The exterior components are glued and fixed to the body comprised of CFC and steel.
The front is characterised by the acute angle of the central 'arrow' and by the powerful forward-facing air intakes. Although they do not supply air directly to the turbine like an airplane, bearing in mind the 650 hp, an abundant volume of air is necessary to cool the carbon brake disks and the six cylinder callipers.
Characterised by coherent functions
Naturally, both doors on the Reventón open upwards - since the legendary Countach this has also been a symbol of the V12 Lamborghini product line. With their asymmetric configuration, the large air intakes below the doors provide an example of the extreme coherence with which a Lamborghini fulfils its function: on the driver's side it is large to increase the flow of oil to the radiator. On the passenger's side of the vehicle, the air intake is flat because in this case, it only has to ensure the flow below the floor. The aerodynamically optimised flat floor structure terminates at the rear with a diffuser featuring an accentuated shape. This guarantees excellent road grip and stability even at 340 km per hour.
In spite of the extreme and innovative language of its shape, the Reventón not only maintains all the strong features of the Murciélago LP640, but also offers further amelioration in terms of aerodynamics, the important engine cooling system, the air intake system and brakes. The airflow and the section of the variable geometry air intakes of the engine and the rear spoiler (also adjustable) have been modified.
Owners of the 20 examples will be able to test the performance of his or her Lamborghini in person.
Perfected to the ultimate detail
The engine hood made of glass laminate with open ventilation slits offers a glimpse of the beating heart of the twelve cylinders of the super car. The glass also features the marked arrow angle that characterises the design from the front to the rear spoiler. The Lamborghini designers' love for detail is beautifully illustrated by the fuel tank lid: a small mechanical work of art, achieved by milling a solid aluminium block.
The combination lights transform the incisiveness of the design into light: the front features the most modern light-emitting diodes alongside Bi-Xenon headlights. Seven LEDs ensure continuous daylight while there are a further nine diodes for the indicator and hazard lights. Another technical innovation is found in the rear light LEDs. Because of the high temperature in the rear low part of the car, special heatproof LEDs are used for the indicator and hazard lights, stoplights and rear lights with a triple arrow optical effect.
A new body colour
Naturally, such a refined language of shape also demands an extraordinary colour. For the 20 examples of the Reventón, the designers from Sant'Agata Bolognese have created a totally new hue: Reventón, a mid opaque green/grey without the usual shine. However, thanks to the metallic particles, in the daylight this colour tone features surprising depth.
Opaque and brilliant colours for the wheel rims
This play of opaque and lustre is also featured on the wheel rims, especially created for the Reventón. Opaque carbon fins are screwed onto the black aluminium spokes, not only creating a visual effect with the precision of a surgeon's scalpel, but a turbine effect also ensures optimum cooling for the powerful ceramic brake disks.
TFT display similar to an airplane
The same innovative force applied to the exterior design characterises the cockpit of the Reventón. Designed and created using Alcantara, carbon, aluminium and leather that comply with the top quality standards, the interior is inspired by the next generation cockpits: just like in modern airplanes, the instruments comprise three TFT liquid crystal displays with innovative display modes. At the touch of a button, the driver can choose from two vehicle information display modes. The instruments are housed in a structure milled from a solid aluminium block, protected by a carbon fibre casing.
The G-Force-Meter is also completely new: this display shows the dynamic drive forces, longitudinal acceleration during acceleration and braking, as well as transversal acceleration around bends. These forces are represented by the movement of an indicator on a graduated 3D grid depending on the direction and intensity of the acceleration. A similar instrument can be found in the airplanes. Formula One teams also use a similar device to analyse dynamic forces.
Customisable instruments
The instrument on the left of the speedometer associates the number of revolutions in the form of a luminous column with the display of the selected gear. Finally, every Reventón is equipped with a robotised e.gear controlled by two small levers under the steering wheel.
By simply pressing a button, the driver can switch to the second, quasi-analogical display, where the classic circular instruments, speedometer and engine speed indicator are configured in an equally innovative way and transformed into luminous pilot lamps with varying colours. The G-Force-Meter naturally remains at the centre in this display mode.
Electronic system developed entirely by Lamborghini
All this is possible thanks to the fact that the entire electronic platform of the Reventón, together with all the control devices, has been autonomously developed by the Lamborghini experts.
The same process for integrating the electronic displays in the car was applied to the Lamborghini Engineering Department.
From the conception of the very first radical ideas, the entire Reventón has been developed in Sant'Agata Bolognese thanks to tight teams of remarkably creative experts. An extremely refined and efficient process was employed: CAD design and development, creation of the prototype in the Prototype Department, all carried out under the constant supervision of the Research and Development Department's technicians and testers.
Atelier of creativity and high efficiency
Inaugurated in 2004, the Centro Stile is dedicated to design and characterised by a high degree of efficiency: an "atelier" of creators, designers and prototype constructors, who encapsulate the Lamborghini culture and spirit by using their remarkable skills to create aesthetic innovation.
The Centro Stile is located in a 2,900 square two-storey building. The large pavilion houses two test floors and related production and analysis equipment, while other rooms are set aside for the most advanced computerised workstations for designers and a style-model construction workshop. The Centro Stile is also closely linked to the nearby Engineering Department: the direct line between the Lamborghini development departments guarantees that ideas rapidly become reality.
Creativity and production under the same roof
The Lamborghini Reventón is a practical illustration of the streamlined functionality and efficiency characterising the Centro Stile: it took less than a year to progress from the first ideas to the finished car. The complete design process from the first sketches on paper, to three dimensional computer models with 1:10 or 1:4 scale, right up to the real size prototype is organised around streamlined, fast, efficient work groups. Thanks to the Centro Stile, for the first time in its history, Lamborghini is now able to create its own style philosophy in-house without having to rely on any external collaboration.
The 20 units will be manufactured in Sant'Agata, using a production process characterised by artisan perfection and rigorous quality standards.
A masterpiece with tested technology
The technology found in the Murciélago LP640 has not been modified. The engine in the LP640 forwards is the classic twelve-cylinder engine with 6.5 litre displacement. Only for this car, Lamborghini guarantees, an astounding 650 HP (478 kW) at 8,000 revolutions per minute (rpm). The huge torque, equal to maximum 660 Nm, ensures a powerful switch from any number of revolutions: even the slightest pressure on the accelerator is spontaneously transformed into thrust. The robotised e.gear changes gear faster than even the most expert driver. In addition, the permanent Viscous Traction four-wheel drive system ensures that every force is constantly translated into movement.
As in the original Murciélago LP640, the Reventón accelerates from 0 to 100 km/h in just 3.4 seconds, with a maximum speed over 340 km/h.
Born to become a legend
Since its foundation, Lamborghini has been a creator of trends in the world of sports cars and has always manufactured cars with an absolutely unmistakable character. Models such as the Miura or Countach, for example, were veritable forerunners and rapidly acquired the status of timeless classic cars. From the moment they are launched, every new Lamborghini promises to become a legend, destined to become a sought-after and precious possession.
With the Lamborghini Reventón, Lamborghini has done it again; it has created an unequalled super car; the perfect synthesis between the exclusivity and appeal of a limited edition design masterpiece, and the dynamism and driveability of a standard sports car. Thus, the Lamborghini legend is further enhanced by another, stylish future classic.
Lamborghini Reventón - Technical data
Frame
High strength tubular steel structure with carbon fibre components.
Bodywork
In carbon fibre, except roof and door external panels (steel)
Steering
Type: Mechanical (rack and pinion) power-assisted
Right-hand turning circle: 12.55 m (41.17 ft)
Wheels and tyres
Front: 245/35 ZR 18
Rear: 335/30 ZR 18
Engine
Type: 12 cylinders at 60°
Bore and stroke: 88 mm x 89 mm (3.46 in x 3.50 in)
Displacement: 6496 cc (396.41 in3)
Compression ratio: (11 ± 0.2):1
Maximum power: 650 HP (478 kW) at 8000 rpm (guaranteed through the engine selection)
Maximum torque: 660 Nm (487 lb-ft) at 6000 rpm
Engine position in vehicle: Longitudinal central-rear
Cylinder heads and engine block: Aluminium
Intake system: Variable geometry with 3 operating modes
Performance data
Top speed: 340 km/h (211.3 mph)
Acceleration 0-100 km/h (0-62 mph): 3.4 s (before: 3.8 s)
Fuel Consumption (according to DIR 1999/100/CE)
Urban: 32,3 l/100km
Extra-urban: 15,0 l/100 km
Combined: 21,3 l/100 km
CO2 emissions: 495 g/km
第2个回答 2009-05-23
Ferruccio Lamborghini was born in Italy in 1916. He was fascinated with engines from an early age. During World War II he joined the army and was stationed on the island of Rhodes. Fortunately there was little going on there during the war. The island was essentially isolated from the rest of the world. Any cars, trucks or motorcycles that broke down had to be repaired on the spot with reused parts. Lamborghini became known as a wizard at mechanical improvisation and became very much in demand at fixing engines.
After the war he returned to his home near Modena in northern Italy and setup a small car and motorcycle repair shop. He soon realized that there was a desperate need for tractors in the agricultural area in which he lived. He found he could build about one tractor a month from derelict military vehicles. As Italy's economy grew demand for his high quality tractors started to grow. He began building his own tractor engines. His tractor business became very successful reaching a rate of over 400 a month in 1960. He soon looked at expanding the business and in 1960 began manufacturing heaters and air conditioning units for buildings as well as maintaining the tractor business. This too became very successful.
About this time Lamborghini started to get interested in developing a high performance car. He had owned Oscas, Maseratis and Ferraris but was always disappointed with them. Particularly their engines. There is a now famous story about how he was frustrated with problems he had with a clutch in a Ferrari (a Ferrari 250 GT), and went to visit Enzo Ferrari who's factory was nearby. Enzo had no time for a tractor manufacture and simply dismissed him. Lamborghini decided there was nothing Ferrari was doing he could not do better. He decided to build his own car with a V12 engine. For the design he found a very talented engineer named Giampaolo Dallara who had previously worked on a Ferrari V12 engine.
The new engine had 4 cams, a short stroke and 4 big bore valves per cylinder. It developed a surprising 350 HP. It was an all aluminum engine with a crankshaft supported by seven main bearings. These crankshafts were machined from SAE 9840 steel. The connecting rods (12) were of SAE 4340 steel. The pistons were of forged aluminum. Each pair of camshafts were driven by their own half engine speed sprocket and silent chain. This engine was really the prototype for all future Lamborghini engines. A body designed by Scaglione-Touring was used to house the engine.
The Lamborghini "350 GTV" prototype was shown to the public on the Turin Auto Show of 1963. Sales started the following year. The car was called the 350 GT. It was a complete success. Over 130 were sold.The future of Automobili Lamborghini looked very bright during the sixties. The 350 GT was succeeded by the 400 GT and then the 400 GT 2+2. The 350 GT and 400 GT 2+2 made the Lamborghini name known throughout the world. With the funds coming in from these cars and his successful tractor business Ferruccio allowed his engineers to design and construction a new car - the Lamborghini Miura. The Miura made the Lamborghini name legendary. It was a car truly ahead of its time. It shocked even companies like Ferrari and Maserati.
The Miura was first shown on November 1965 at the Turin Auto Show by Ferruccio Lamborghini himself. Only the chassis was shown at the show, the engine was transversely mid-mounted, something up to then only seen in real F1 race cars. The design of the body was executed by Marcello Gandini in less than a year, and on the March 1966 Geneva Show it was completed and on display. It looked even better than in Turin. The car was very aggressively styled, and an appropriate name was chosen for it, the Miura, a name taken from the ferocious Spanish fighting bulls. Again the car was a complete success.
This was followed in 1973 at the Geneva Auto Show when Lamborghini shocked the world again with his revolutionary LP400 Countach. Only a prototype was shown. Today it is difficult to realize the impact that car had on everybody at that time. Even now the car is a show stopper! The car at the show was painted in a bright red and with a black suede interior. It showed for the first time, the by now, famous, Lamborghini signature swing up doors. It also displayed unique vertically mounted rear air intakes to go with its powerful 4 Liter engine.
In 1974 disaster struck. The Lamborghini tractor business received a major setback. A massive order for tractors to a south American country was cancelled. Lamborghini anticipating the demand, had previously upgraded the tractor factory to be able to build the numbers of tractors required. The company lost a lot of money over it. Compounding things also at this time was a series of labor problems at the factory. While his personal fortune was still considerable he decided to sell part of his share in the factory. Eventually the factory was taken over by Fiat.
During the seventies the company survived on sales of Miura's. The car business started to be self sufficient and make money. However Lamborghini eventually sold all his remaining stock in the company to a Swiss investor. The company to this day still retains his name however. Ferruccio Lamborghini died in February 1993 at the age of almost 72
The oil crisis of the 70's started to made sales of high performance cars difficult. Production art the factory was plagued with budget and parts supply problems. People gave up waiting for cars with two year back orders. A wealthy Canadian, Walter Wolf, played a major role is supporting Lamborghini and developing the Countach during these difficult times.
In 1978 the company declared bankruptcy. An Italian court was appointed to find a buyer. A Swiss based group called the Mimran brother's were able to save the factory. Patrick Mimran (one of the brothers), in 1980 started to turn the company around. The Countach was developed further under him from the LP500 S right up to the impressive QuattroValvole. .
Just as things were going well, the Mimran brothers sold the company to Chrysler Corporation. This was a big surprise at the time. Chrysler support however was just what the company needed at that time. They were working on a Countach successor -- the Diablo. Chrysler kept the winning team together in Italy. While the cultures of the two companies were different and things got stressful between the management groups, they did succeed in bringing the vast resources of Chrysler to bear on the design, pollution controls, and new manufacturing techniques etc. for the new car.
Again the result was an outstanding success. The new Lamborghini Diablo got rave reviews everywhere it went. However in another twist of faith, in 1994 Chrysler fell upon hard times and had to sell the company. It was bought by an Indonesian investment group headed by Tommy Suharto of the well known Suharto family. Unfortunately in the late 90's an economical crisis started to hit the Indonesian owners hard and the much needed money for research on a successor to the Diablo started to dry up.
Fortunately the German company Audi had an interest in Lamborghini. On August 4 1998, in a complex series of transactions Audi AG became the sole owner of Automobili Lamborghini. As in the case of the Chrysler buyout, this could not have been a better time for Lamborghini. Audi took an active role in designing the Murcielago and brought to the table again the vast resources of a major automobile company to develop and produce another exotic car.
Lets hope this is the last chapter of ownership changes in this unique little Italian car company. It is to the credit of the people there that they have hung in to all the changes of ownership they have experienced over the years and yet produced such exciting cars.
第3个回答 2009-05-23
FRAME
Tubular frame made from high-strength steel alloy with carbon fibre structural parts
BODY
Carbon fibre with door and roof in steel; transparent engine bonnet (optional)
SUSPENSIONS
Independent front and rear double wishbones, anti-roll bars; anti-dive and anti-squat
BRAKES
Power vacuum, aluminium alloy callipers:
8 pistons front callipers and 4 pistons rear callipers
Ventilated discs: Ø 380 x 34 mm - Ø 355 x 32 mm
Carbon Ceramic Brakes (optional)
Ø 380 x 36 mm and 6 piston brake callipers (front - rear)
STEERING
Power-assisted rack and pinion
TYRES (front-rear)
Pirelli Pzero 245/35 ZR 18 - 335 /30 ZR 18
WHEELS (front-rear)
Aluminium alloy, 8.5"x Ø 18"-13"x Ø18"
KERB-TO-KERB TURNING CIRCLE
12.55 m
MIRRORS
External mirrors with electrical closing system and heating system, internal mirror with anti-blinding system
REAR SPOLILER
Electronically controlled
First step: 130km/h and closure 180km/h,
Second step: 220 km/h and returning to the first step under 180 km/h
AIR FLAPS
Opening:
1. Water temperature > 95 °C and speed < 180 km/h
2. 65 °C < Water temperature < 95 °C
3. external air temperature > 30 °C and speed < 180 km/hTYPE
12 cylinders V 60º
DISPLACEMENT
6496 cc
BORE AND STROKE
Ø 88 mm x 89 mm
INTAKE SYSTEM
Variable geometry, 3 modes
VALVE GEAR
chain drivenn, intake and exhaust continuously variable valve timing, electronically controlled
COMPRESSION RATIO
11:1
MAXIMUM POWER
471kW (640 PS) at 8000 rpm
MAXIMUM TORQUE
660Nm at 6000 rpm
EMISSION CONTROL SYSTEM
Catalytic converters with lambda sensors
COOLING SYSTEM
Two water radiators + oil cooler, electronically controlled variable geometry air inlet system (Lamborghini VACS)
ENGINE MANAGEMENT SYSTEM
Lamborghini L.I.E., with individual static ignition, multipoint sequential fuel injection, drive-by-wire system, traction control system, OBD system
FRAME
Tubular frame made from high-strength steel alloy with carbon fibre structural parts
BODY
Carbon fibre with door and roof in steel; transparent engine bonnet (optional)
SUSPENSIONS
Independent front and rear double wishbones, anti-roll bars; anti-dive and anti-squat
BRAKES
Power vacuum, aluminium alloy callipers:
8 pistons front callipers and 4 pistons rear callipers
Ventilated discs: Ø 380 x 34 mm - Ø 355 x 32 mm
Carbon Ceramic Brakes (optional)
Ø 380 x 36 mm and 6 piston brake callipers (front - rear)
STEERING
Power-assisted rack and pinion
TYRES (front-rear)
Pirelli Pzero 245/35 ZR 18 - 335 /30 ZR 18
WHEELS (front-rear)
Aluminium alloy, 8.5"x Ø 18"-13"x Ø18"
KERB-TO-KERB TURNING CIRCLE
12.55 m
MIRRORS
External mirrors with electrical closing system and heating system, internal mirror with anti-blinding system
REAR SPOLILER
Electronically controlled
First step: 130km/h and closure 180km/h,
Second step: 220 km/h and returning to the first step under 180 km/h
AIR FLAPS
Opening:
1. Water temperature > 95 °C and speed < 180 km/h
2. 65 °C < Water temperature < 95 °C
3. external air temperature > 30 °C and speed < 180 km/hTYPE
12 cylinders V 60º
DISPLACEMENT
6496 cc
BORE AND STROKE
Ø 88 mm x 89 mm
INTAKE SYSTEM
Variable geometry, 3 modes
VALVE GEAR
chain drivenn, intake and exhaust continuously variable valve timing, electronically controlled
COMPRESSION RATIO
11:1
MAXIMUM POWER
471kW (640 PS) at 8000 rpm
MAXIMUM TORQUE
660Nm at 6000 rpm
EMISSION CONTROL SYSTEM
Catalytic converters with lambda sensors
COOLING SYSTEM
Two water radiators + oil cooler, electronically controlled variable geometry air inlet system (Lamborghini VACS)
ENGINE MANAGEMENT SYSTEM
Lamborghini L.I.E., with individual static ignition, multipoint sequential fuel injection, drive-by-wire system, traction control system, OBD system